2018 Exmark LAZER Z X-SERIES LZX940EKC606W0

Selling Price -

$8,900.00

Information

2018 - EXMARK LAZER Z X SERIES ZERO TURN MOWER 940CC KOHLER RED TECH EFI ENGINE 60" ULTRACUT SERIES 6 MOWER DECK FULL SUSPENSION SEAT BELONGED TO A HOMEOWNER WITH ACREAGE. NOT A COMMERCAL CUTTER MACHINE.

Photos

Highlights

  • $8,900.00
  • Hannibal Tractor
  • Pre-Owned
  • 20865
  • 2018
  • Exmark
  • LAZER Z X-SERIES LZX940EKC606W0
  • 403235191
  • Model: ECV940 | Series: Command™ EFI
  • 35
  • Gas
  • Available
  • 72.8 in. (184.9 cm)
  • 70 in. (177.8 cm) | Cutting:1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.

Specifications

  • 2018
  • Exmark
  • LAZER Z X-SERIES
  • LZX940EKC606W0
  • Zero-Turn Mower
  • Model: ECV940 | Series: Command™ EFI
  • Kohler®
  • 3,650 RPM | Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–6.0 mph (11.3 kmph) reverse
  • Heavy-duty canister air filtration system
  • Electronic Fuel Injected
  • 999
  • Gas EFI | Indicator: Yes - electronic Sender
  • Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake
  • Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
  • Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Lever-actuated disc brake.
  • 12-volt battery with 25-amp alternator.
  • .50" thick caster yoke arms.
  • Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Drive: 24 x 12.0-12, 4-ply Turf Master®
  • Deck: 60"
  • 70 in. (177.8 cm) | Cutting:1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • 72.8 in. (184.9 cm)
  • 86.1 in. (218.7 cm)
  • 12-gallon (45.4-L), single tank with single fill location.
  • Cup Holder: Standard | Drive: Hydro-Drive | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch. | Onboard Intelligence: RED Technology
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • 3 Blades at 20.50" Length | Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 30mm (1.18") diameter spindle shaft and splined blade driver. | Blade Tip Speed: Approximately 18,500 fpm.
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.